AA For å endre tekststørrelsen, hold inne cmd knappen og trykk plusstegnet + for å skalere opp, minustegnet - for å skalere ned. For å endre tekststørrelsen, hold inne ctrl knappen Ctrl og trykk plusstegnet + for å skalere opp, minustegnet - for å skalere ned. Handlekurv

Fres, Skrueende

Length: 110 mm Shaft size: 2,5 mm Weight: 2 g Screw end miller NOT suitable for milling steel screws. Working Tip: The tools No. 2217 03, 2216 00 and 2271 25 are for processing common German Silver screws and brass screws. NB: Processing steel screws wil

Fitting tool Garnityrbriller

Tool set for rimless frames Consisting of 2268 00, 2268 01 Fitting tools for rimless frames, 1.2 + 1.4 mm thread and 2266 20 Drill hole chamfer tool. Made in Germany

Muttertrekker med skrueknekker, 1,4 mm.

Fitting tool for rimless frames, 1,4 mm thread Length: 70 mm Weight: 6 g Nut driver and screw shorter in one tool. For all popular star nuts with an outer diameter of 2.5 mm. A tool to snap screws off at nut level. This is done by inserti

Muttertrekker med skrueknekker, 1,2 mm.

Fitting tool for rimless frames, 1,2 mm thread Length: 70 mm Weight: 6 g Nut driver and screw shorter in one tool. For all popular hex nuts with an outer diameter of 2.7 mm. A tool to snap screws off at nut level. This is done by inserting

Håndverktøy til å pusse bor hull

Drill hole chamfer tool Length: 71 mm Weight: 7 g To ream the edges of drilled holes easily. The special lanceolate shape can ream the edge with little pressure – fast and effective. Also count

Verktøy til å pusse bor hull

Shaft size: 1,6 mm Chamfer tool to round off the edges of drill holes. Suitable for tool holders No. 2069 00, 2068 00 and 2065 00

Fres, dobbeltkjegle, 2,3 mm.

Shaft size: 2,34 mm Length: 44,5 mm Miller size: 2,3 mm Double cone miller To mill a notch for rhinestones No. 090050 and 090051. For deburring drilling holes in plastic lenses. (Can also be used for polycarbonate and Trivex.)

Fres, dobbeltkjegle, 2,7 mm.

Shaft size: 2,34 mm Length: 44,5 mm Miller size: 2,7 mm Double cone miller To mill a notch for rhinestones No. 090050 and 090051. For deburring drilling holes in plastic lenses. (Can also be used for polycarbonate and Trivex.

Fres, dobbeltkjegle, 4,0 mm.

Shaft size: 2,34 mm Length: 44,5 mm Miller size: 4,0 mm Double cone miller To mill a notch for rhinestones No. 090050 and 090051. For deburring drilling holes in plastic lenses. (Can also be used for polycarbonate and Trivex.)

Diamant fres, på stift

Shaft diameter: 2.34 mm Cylindermass: 5.0×0.6 mm Speed: approx. 15,000-18,000 rpm Diamond miller To groove rims of lenses.