AA For å endre tekststørrelsen, hold inne cmd knappen ⌘ og trykk plusstegnet + for å skalere opp, minustegnet - for å skalere ned. For å endre tekststørrelsen, hold inne ctrl knappen Ctrl og trykk plusstegnet + for å skalere opp, minustegnet - for å skalere ned. Handlekurv
Produkter

Spiralbor 0,7 mm, 2 stk.

Drill diameter: 0,7 mm Shaft size: 2,34 mm Speed rpm: 1.400-10.000 Drill HSS For drilling out steel screws and titanium, especially designed for hard materials, high durability, also suitable for polycarbonate and precious metals.

Spiralbor 0,8 mm, 2 stk.

Drill diameter: 0,8 mm Shaft size: 2,34 mm Speed rpm: 1.400-10.000 Drill HSS For drilling out steel screws and titanium, especially designed for hard materials, high durability, also suitable for polycarbonate and precious metals.

Spiralbor 0,9 mm, 2 stk.

Drill diameter: 0,9 mm Shaft size: 2,34 mm Speed rpm: 1.400-10.000 Drill HSS For drilling out steel screws and titanium, especially designed for hard materials, high durability, also suitable for polycarbonate and precious metals.

Spiralbor 1,0 mm, 2 stk.

Drill diameter: 1,0 mm Shaft size: 2,34 mm Speed rpm: 1.400-10.000 Drill HSS For drilling out steel screws and titanium, especially designed for hard materials, high durability, also suitable for polycarbonate and precious metals.

Spiralbor 1,1 mm, 2 stk.

Drill diameter: 1,1 mm Shaft size: 2,34 mm Speed rpm: 1.400-10.000 Drill HSS For drilling out steel screws and titanium, especially designed for hard materials, high durability, also suitable for polycarbonate and precious metals.

Spiralbor 1,2 mm, 2 stk.

Drill diameter: 1,2 mm Shaft size: 2,34 mm Speed rpm: 1.400-10.000 Drill HSS For drilling out steel screws and titanium, especially designed for hard materials, high durability, also suitable for polycarbonate and precious metals.

Spiralbor 1,3 mm, 2 stk.

Drill diameter: 1,3 mm Shaft size: 2,34 mm Speed rpm: 1.400-10.000 Drill HSS For drilling out steel screws and titanium, especially designed for hard materials, high durability, also suitable for polycarbonate and precious metals.

Bor for stål, 1,0 mm.

Drill diameter: 1,0 mm Shaft size: 2,34 mm Speed rpm: 10.000 – 15.000 Drill Right hand cut, especially suitable for drilling out steel screws from hinges. The pressure should be low.

Bor for stål, 1,2 mm.

Drill diameter: 1,2 mm Shaft size: 2,34 mm Speed rpm: 10.000 – 15.000 Drill Right hand cut, especially suitable for drilling out steel screws from hinges. The pressure should be low.

Bor for stål, 1,4 mm.

Drill diameter: 1,4 mm Shaft size: 2,34 mm Speed rpm: 10.000 – 15.000 Drill Right hand cut, especially suitable for drilling out steel screws from hinges. The pressure should be low.