Bor for stål, 1,6 mm.
Drill diameter: 1,6 mm Shaft size: 2,34 mm Speed rpm: 10.000 – 15.000 Right hand cut, especially suitable for drilling out steel screws from hinges. The pressure should be low.
Login | Register
AA
For å endre tekststørrelsen, hold inne cmd knappen ⌘ og trykk plusstegnet + for å skalere opp, minustegnet - for å skalere ned.
For å endre tekststørrelsen, hold inne ctrl knappen Ctrl og trykk plusstegnet + for å skalere opp, minustegnet - for å skalere ned.
Handlekurv
Logg inn eller registrer
Er du ikke kunde?
Registrer deg her
Spiralbor 1,1 mm, 3 stk.
Drill diameter: 1,1 mm Shaft size: 1,1 mm Speed rpm: 500-3.000 Material: HS-Steel, chrome polished With cylinder shaft, right hand cut, to be used for: plastic, precious metals
Spiralbor 1,3 mm, 3 stk.
Drill diameter: 1,3 mm Shaft size: 1,3 mm Speed rpm: 500-3.000 Material: HS-Steel, chrome polished With cylinder shaft, right hand cut, to be used for: plastic, precious metals
Spiralbor 1,4 mm, 3 stk.
Drill diameter: 1,4 mm Shaft size: 1,4 mm Speed rpm: 500-3.000 Material: HS-Steel, chrome polished With cylinder shaft, right hand cut, to be used for: plastic, precious metals
Spiralbor 1,5 mm, 3 stk.
Drill diameter: 1,5 mm Shaft size: 1,5 mm Speed rpm: 500-3.000 Material: HS-Steel, chrome polished With cylinder shaft, right hand cut, to be used for: plastic, precious metals
Spiralbor 1,6 mm, 3 stk.
Drill diameter: 1,6 mm Shaft size: 1,6 mm Speed rpm: 500-3.000 Material: HS-Steel, chrome polished With cylinder shaft, right hand cut, to be used for: plastic, precious metals
Spiralbor 1,7 mm, 3 stk.
Drill diameter: 1,7 mm Shaft size: 1,7 mm Speed rpm: 500-3.000 Material: HS-Steel, chrome polished With cylinder shaft, right hand cut, to be used for: plastic, precious metals
Spiralbor 1,8 mm, 3 stk.
Drill diameter: 1,8 mm Shaft size: 1,8 mm Speed rpm: 500-3.000 Material: HS-Steel, chrome polished With cylinder shaft, right hand cut, to be used for: plastic, precious metals
Spiralbor 2,0 mm, 3 stk.
Drill diameter: 2,0 mm Shaft size: 2,0 mm Speed rpm: 500-3.000 Material: HS-Steel, chrome polished With cylinder shaft, right hand cut, to be used for: plastic, precious metals
Spiralbor 0,9 mm, 3 stk.
Drill diameter: 0,9 mm Shaft size: 0,9 mm Speed rpm: 500-3.000 Material: HS-Steel, chrome polished With cylinder shaft, right hand cut, to be used for: plastic, precious metals